Please hold the device in your hand with the screen side facing toward you, and the buttons closest to you.
When the device is in use the screen displays some status information. You do not need to see the screen, and if you touch the screen it will not affect the functioning of the device. The screen can be used to connect your In Your Pocket device to a Wifi network, and this will be explained in detail further on in the User Guide.
On the front of the device, below the screen, are three flat buttons. These are the Talk Buttons and are the main buttons to use when interacting with Pocket. All of the buttons perform the same function, so it does not matter which one you press. To operate In Your Pocket, click one of these buttons once, and when you hear the rising tone, ask for what you want. When you hear the falling tone and a tick tock sound, you will know that Pocket is collecting the information you asked for and will bring it to you soon.
There is a microphone located just below these three buttons. This is where Pocket listens to you when there is no head set connected. So, try not to cover this up, and hold this closer to your mouth if Pocket is having trouble understanding you.
Now, describing the top surface of the In Your Pocket device, on the left of this surface, there is a head set port. This is where you can connect your head set or head phones to listen with more privacy. When the head set is connected, you can use the button on the head set as the talk button, and communicate with Pocket through the microphone on the head set.
Now, describing the left surface of the device. Near the top of the left surface is the volume bar. You can press the top of this bar to turn the volume up, similarly you can press the bottom of this bar to turn the volume down.
Just below the volume bar on the left surface of the In Your Pocket device is the Power Button. To power the device on hold the power button down until you feel a small vibration, which should occur in around 2 seconds. This vibration indicates that In Your Pocket is powering up correctly, and after another 40 seconds or so, Pocket will announce that it is ready to speak with you. If you do not feel the vibration within 10 seconds, then try the sequence again. If you still get no response, then the battery may be flat, so plug the device in to recharge before trying again.
To power off, hold the power button down through four high pitched pips and then let go of the button. You can also power off by clicking the talk button and saying, power off. Pocket will announce that it is powering off and you will hear some beeps. Press any button during the beeps to cancel the power off sequence.
On the right hand surface of the In Your Pocket device is the power charging port, where you connect your charging cable to recharge In Your Pocket.
Also on the right hand surface of the device, near the bottom, is another button which is not used at this time. You can ignore this button, and it will not cause any problems or affect the functionality if you accidentally press it. This button may be linked to other features in future.
There are no buttons or ports on the bottom surface of the device.
Now describing the back surface of the In Your Pocket device. In the middle near the top you will notice a small, round, glass component. This is the camera lens, which is used by In Your Pocket for the Be My Eyes function. You can find out more about Be My Eyes in the user guide.
Directly below the camera lens is a slightly recessed button that is the Assistance button. Click this three times to SMS and call your assistance contacts. This will let them know your current location.
The bottom of the back surface of In Your Pocket is where the speaker is located. This is where you will hear Pocket speaking when there is no head set connected. ')