Please hold the device in your hand with the screen side facing up. To orient your device in this way you can feel along the short edges of your device and identify the side which has the charging port, a small rectangular hole in the centre. This edge is the bottom of your device. With the bottom edge oriented downwards, feel along the long edges of your device for the side that has buttons. With the bottom edge still facing downwards, rotate your device so that the edge with buttons is on the right. You will now have your device oriented correctly.
When the device is in use, the screen displays some status information. You do not need to see the screen at all to use this device. The screen can also be used as a touch screen for many functions. This is explained further throughout the User Guide in relevant sections.
The front of your device is one flat pane of glass with no physical buttons present. However your touchscreen does have a talk button, the talk button is the main button you will use when interacting with RealSAM Pocket. This button is present in the bottom quater of your touchscreen.
To use RealSAM Pocket tap this talk button once, and when you hear a rising tone, ask for what you want. When you hear a falling tone, and a tick tock sound, you will know that RealSAM Pocket is collecting the information you asked for and will bring it to you soon.
If you want to avoid accidentally pressing this talk button, for example when putting the device into a pocket or a bag, you can lock the screen by holding down the lock button for approximately 3 seconds, after which your device will say locked. The lock button is the second button from the top on the right edge of your device. Once you have locked the screen you will be unable to press the talk button, but you will still be able to use the volume buttons. If you want to unlock the screen repeat the same process by holding down the lock button for approximately 3 seconds, your device will say unlocked.
On the right side of your device, there are 2 buttons, one long and one short. The long top button is used to control the volume. Pressing the upper half of this button will turn the volume up, and pressing the lower half will turn the volume down.
Below the volume button is the shorter lock button. To power the device on, hold the lock button down for about 2 seconds until you feel a small vibration. This vibration indicates that RealSAM Pocket is powering up correctly. After 40 seconds or so, the device will announce that it is ready to speak with you. If you do not feel the vibration within 10 seconds, then try the sequence again. If you still get no response, your device may not be charged. Plug the device to recharge before trying again. Once the device has turned on the lock button can be used to lock your devices touchscreen, preventing the talk button from being pressed accidentally. To lock the screen hold down the lock button for approximately 3 seconds, your device will tell you that it is locked. Once you have locked the screen you will be unable to press the talk button, but you will still be able to use the volume buttons. If you want to unlock the screen repeat this process by holding down the lock button for approximately 3 seconds, your device will tell you that it is unlocked.
In the middle of the bottom of your RealSAM Pocket, there is the charging port. Plug your charging cable into the port and connect the other side to an electricity source to charge your device.
To the left of the charging port, there is a microphone. This one of two microphones with which RealSAM Pocket listens to you if no headset is connected, the other is on the top edge of your device. Try not cover these. If device is having trouble understanding you, consider holding the device with one of the microphones close to your mouth for better results.
To the left of the microphone there is a headset port. This is where you can connect your wired headset or headphones to listen with more privacy. When the headset is connected, you can use the button on the headset as the talk button, and communicate with your device through the built in microphone on the headset.
To the right of the charging port, there is the speaker. If you are having trouble hearing RealSAM Pocket make sure there is nothing covering the speaker. Also consider increasing the volume if needed.
On the top edge of your device there is a small hole, This one of two microphones with which RealSAM Pocket listens to you if no headset is connected, the other is on the top edge of your device. Try not cover these. If device is having trouble understanding you, consider holding the device with one of the microphones close to your mouth for better results.
If you hold your device with the back of the device facing you and the screen facing away from you, you will find three raised round glass components on the top left corner of the back panel. These are cameras. To the right of the cameras there are two smaller unraised glass components, the top is another camera, and the bottom is the flash.